A water supply valve is required to control the water coming into the appliance if your refrigerator has a water and ice dispenser feature, or even just an installed ice maker. The supply valve is normally found at the bottom backside regarding the fridge behind an access panel. The home’s water supply typically travels through copper tubing connected to the valve inlet slot.
The supply valve is an electrically-control component with inlet and socket water ports plus one or even more solenoids.
whenever signaled by way of a control board, the solenoid or solenoids will available to enable water to enter an inlet hose which directs water via a water that is optional towards the dispenser and/or to an ice maker tray fill tube. In the long run, the solenoids can fail or calcium deposits can build-up when you look at the valve producing an obstruction, leading to the ice maker not able to create ice and restricted, or no, water taken from the dispenser whenever lever is pressed. Since water supply valves may not be easily washed or repaired, a malfunctioning valve should be changed by having a new one.
How exactly to change a water supply valve that is defective
- Unplug the power cord that is refrigerator’s.
- Shut from the water supply into the fridge.
- Pull the ice box out of the wall surface.
- Unthread the screws to eliminate the reduced back access panel. Bear in mind, you may have to detach the copper tubing or water that is incoming from the inlet valve slot before you completely eliminate the panel.
- Detach the incoming water line through the water supply valve inlet port when you yourself haven’t done this currently.
- Unthread the screws to produce water supply valve mounting bracket or plate through the ice box framework.
- Disconnect the cable connecter or connecters through the solenoid terminals.
- If applicable, slide out any locking clips then depress the keeping rings to detach the socket hose or hoses through the valve ports. Be equipped for some water to spill.
- If required, take away the water that is old valve from the mounting dish or bracket.
- Install the brand new water supply valve by aligning it from the mounting dish or bracket if required.
- Completely place the hose or hoses to the socket ports and, if needed, slip in the locking clip or videos to secure.
- Link the cable connecter or connecter to your solenoid terminals.
- Position the mounting dish or bracket regarding the ice box thread and frame the screws to secure.
- Realign the access panel and secure it aided by the screws.
- Connect the incoming water line to your valve’s inlet slot. Then use a wrench to tighten if the water is being supplied through copper tubing, hand-thread the tubing’s compression nut onto the inlet port. Avoid overtightening or perhaps you might harm the tubing.
- Go the fridge straight right foreign brides back from the wall surface.
- Turn water supply straight right back on.
- Plug the power that is refrigerator’s back.
- Switch on the ice manufacturer or run water through the dispenser to verify the brand new supply valve is working precisely and there are not any leakages.
Discover the right water supply valve with fix Clinic
Since water supply valves will be different with regards to the ice box model, it is crucial to determine the valve that is exact fits your fridge. To achieve this, go into the complete model quantity of the applying within the fix Clinic search club, then select “Valve & Float” through the component category filter from the remaining region of the web page to get the part that is matching. Fix Clinic stocks water supply valves for all the top brand name fridges, including Frigidaire, Whirlpool, Kenmore, Samsung, and LG, but you’ll would you like to be sure you’re purchasing the specific valve that matches your model.